Introduction to products:
Single Roller Internal Groove Burnishing Tools can be used for smoothening and work hardening of external and internal grooves.
- Useable for both external and internal grooves
- Are not dependent on diameters of the workpiece
Single Roller Internal Groove Burnishing Tools for External Use
|from Ø 50 mm and up to 120 mm depth
|from Ø 20 mm
Please note that this information represents standard values which must be adapted to the individual cases.
|up to 100 m/min depending on the application
|0.05 — 0.3 mm/rev
|up to 0.03 mm
|up to 1.5 mm
|emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life
|Pre-machining of workpiece
|surface roughness up to 15 μm
|up to 45HRC